Chevy V6 Intake Manifold
Chevy V6 Intake Manifold,
Chevy V6 Intake Manifold,As you remove exhaust manifolds, check for cracks and note position of any baffles or lifting lugs. Such hardware Manifold. Unless you have an engine such as the bigblock Ford or 2.8L Chevy V6, you can now remove the intake manifold.Now updated with new, fullcolor images and information on the latest trends, tools, and technologyincluding hybrid engines and highperformance componentsthis trusted text is the ideal resource for automotive program instructors who Recounts the history of the leading high performance Chevrolets, concentrating on models produced since the introduction of the first V8 engine in 1955, and provides technical detailsIf so, place a Vs" bead of RTV sealer all around the thermostat housing sealing surface on the intake.manifold and install the Fuel line at the carburetor (V8) or the fuel line clips and lines at the throttle body (if equipped with TBI V6). e.Chevy engines Chevy has yet another spinoff from its 30yearold small block V8 — a 263 cube (4.3liter) 90° V6. Along with a tuned intake manifold, this boosts output from 1 12 to 125 (Please turn to page 157) PRESSURE SENSOR When purchasing heads, make sure that the bolt hole angles match those in the intake manifold that will be used. Photo by V6 HEADS Chevrolet is the only source for performance heads for the 2.8 liter and 3.1 liter, 60degree V6 engines. with a completely separate and removable intake manifold, the Chevy design simply eliminated the separate valley cover and used the.intake General Motors then went looking for a good 90° V6 engine and found one right under its nose.OMC found Chevy's V6 lacking in sufficient horsepower for competitive marine use. A shortpassage intake manifold, a larger twobarrel carb with larger area passengers, and crossflow head design should all improve fuel economy and This new color edition is essential for the enthusiast who wants to get the most performance out of this new engine design but is only familiar with the older Chevy smallblocks.Remove the heater hose at the intake manifold. 8. Remove the NOTE: If equipped with an MFI system, remove any component which will interfere with the intake manifold removal. 9. Remove the 173 V6 intake manifold torque sequence.4.